Sulfur is a classified nonmetal element and its symbol is S. Sulfur is the 16th element of the periodic table so its atomic number is 16. The atomic number of an element is equal to the number of protons and electrons in that element. Therefore, a sulfur atom has sixteen protons and sixteen electrons. The number of neutrons in an atom can be determined by the difference between the atomic mass and the number of protons.
The difference between the mass number of the sulfur atom and the number of protons is sixteen. Therefore, a sulfur atom has sixteen neutrons. The number of neutrons depends on the isotope of the element. The sulfur atom has four stable isotopes.
|Atomic weight (average)||32.06|
|Electrons per shell||2, 8, 6|
|Electron configuration||[Ne] 3s2 3p4|
|Oxidation states||+6, +4, -2|
This article discussed in detail how to easily find the number of protons, neutrons, and electrons in a sulfur atom. Also discussed is the position of electrons, protons, and neutrons in an atom, the number of atomic masses, and the isotopes of sulfur. Hopefully, after reading this article you will know the details about this topic.
Where are the electrons, protons and neutrons located in an atom?
An atom is the smallest particle of an element that has no independent existence but is directly involved in chemical reactions as the smallest unit. Atoms are so small particles that they cannot be seen even under a powerful microscope. The diameter of an atom of hydrogen is 0.1nm (1.0nm = 10-9m). So, if 1000 crore atoms of hydrogen are arranged side by side, it will be 1 meter long.
However, it has been possible to detect atoms by increasing the vision of a very powerful electron microscope by two million times. Numerous permanent and temporary particles exist in the atom. Electrons, protons, and neutrons are located in the atom as permanent particles. Also, neutrino, antineutrino, positron, and mason are located in an atom as temporary particles.
Atoms can usually be divided into two parts. One is the nucleus and the other is the orbit. Experiments by various scientists have shown that the nucleus of an atom contains protons and neutrons. The only exception is hydrogen, which has only protons in its nucleus but no neutrons. Electrons revolve around the nucleus in a specific orbit.
How to easily find the number of electrons, protons and neutrons in a sulfur atom?
Scientist Henry Gwynn Jefferies Mosle examined the X-ray spectrum of various elements in 1913-to 1914. The results of his experiments show that each element has a unique integer equal to the number of positive charges in the nucleus of that element. He called that number the order of the atoms.
Thus, the number of positive charges present in the nucleus of an element is called the atomic number of that element. The atomic number of the element is expressed by ‘Z’. This number is equal to the serial number of the periodic table. We know that protons are located in the nucleus of an atom as a positive charge.
That is, the atomic number is the total number of protons. The atom is overall charge neutral. Therefore, the number of negatively charged electrons orbiting in its orbit is equal to the number of positively charged protons in the nucleus.
Atomic number (Z) = Number of charges in the nucleus (p)
How many protons does a sulfur atom have?
Protons are the permanent core particles of an atom. It resides in the center or nucleus of the atom. When a hydrogen atom removes an electron from its orbit, the positively charged particle that remains is called proton. Hence, the proton is expressed by H+. The relative mass of protons is 1, which is approximately equal to the mass of hydrogen (1.00757 amu).
However, the actual mass of the proton is 1.6726 × 10−27 kg. That is, the mass of a proton is approximately 1837 times greater than the mass of an electron. Proton is a positively charged particle. Its actual charge is +1.602 × 10−19 coulombs. The diameter of a proton particle is about 2.4 × 10−13 cm.
There are 118 elements in the periodic table and the 16th of these elements is sulfur. The elements in the periodic table are arranged according to their atomic number. Since sulfur is the 16th element of the periodic table, the atomic number of sulfur is 16. We must always remember that the atomic number and the number of protons of an element are equal. Therefore, a sulfur atom contains sixteen protons.
How many electrons does a sulfur atom have?
Electrons are the permanent core particles of an atom. It resides in a specific orbit of the atom and revolves around the nucleus. The properties of the elements and their compounds depend on the electron configuration. In 1897, scientist J. J. Thomson discovered the existence of electrons through cathode ray examination.
The smallest of the permanent core particles of an atom is the electron. Its mass is about 1/1836 of the mass of a hydrogen atom. The actual mass of the electron is 9.1085 × 10−28 g or 9.1093 × 10−31 kg. The mass of the electron is often ignored because this mass is too small. Electrons always provide a negative charge.
It is expressed by e–. The charge of electrons is –1.609 × 10–19 coulombs and the relative charge is –1. That is, the charge of an electron is equal to that of a proton but the opposite. We must also remember that the number of protons and electrons in an element is equal. Therefore, a sulfur atom contains sixteen electrons in its orbit.
How many neutrons does a sulfur atom have?
Scientist Chadwick discovered neutrons in 1932. It is located in the nucleus at the center of the atom. The neutron is a charge-neutral particle and it is expressed by n. The charge of a neutron is 0 and the relative charge is also 0. The mass of the neutron is 1.674 × 10−27 kg. The number of electrons and protons in an atom is the same but the number of neutrons is different.
We already know that the nucleus is at the center of the atom. There are two types of particles in the nucleus. One is a positively charged particle proton and the other is a charge-neutral particle neutron. Almost all the mass of the atom is accumulated in the nucleus. Therefore, the mass of the nucleus is called atomic mass. The nucleus is made up of protons and neutrons. Therefore, atomic mass refers to the total mass of protons and neutrons.
Atomic mass (A) = Nucleus mass = Total mass of protons and neutrons (p + n)
Again, the mass of each proton and neutron is about 1amu. Therefore, the total number of protons and neutrons is called the atomic mass number. That is, the number of atomic mass(A) is = p + n
Thus, the number of neutrons in an element is obtained from the difference between the number of atomic masses and the number of atoms. That is, neutron number (n) = atomic mass number (A) – atomic number (Z)
|Mass number (A)||Atomic number (Z)||Neutron number = A – Z|
We know that the atomic number of sulfur is 16 and the atomic mass number is about 32. Neutron = 32 – 16 = 16. Therefore, a sulfur atom has sixteen neutrons. Based on the atomic number, mass number, and neutron number of the element, three things can be considered. These are isotope, isobar, and isotone. The number of neutrons depends on the isotope of the atom. The sulfur atom has about twenty-three isotopes.
How to determine the number of neutrons through isotopes of sulfur?
Atoms that have the same number of protons but different mass numbers are called isotopes of each other. The English chemist Frederick Sodi first came up with the idea of isotopes in 1912, and the scientist Aston in 1919 identified two different mass neon atoms (20Ne, 22Ne). He named the atoms with different masses of the same element as isotopes of that element.
The number of protons in an isotope atom does not change but the number of neutrons does. The sulfur atom has about twenty-three isotopes. Such as 27S, 28S, 29S, 30S, 31S, 32S, 33S, 34S, 35S, 36S, 37S, 38S, 39S, 40S, 41S, 42S, 43S, 44S, 45S, 46S, 47S, 48S and 49S.
Among the isotopes, 32S, 33S, 34S, and 36S are stable and formed naturally. The remaining isotopes of sulfur are highly unstable and their half-lives are very short. Of the 23 radioisotopes of sulfur, the longest-lived radioisotope is sulfur-38, with a half-life of 170 minutes and the shortest-lived is sulfur-49 with a half-life shorter than 200 nanoseconds.
All others are under a minute, most under a second. The mass of stable 32S is about 32 (31.9720711), 33S is about 33 (32.9714589), 34S is about 34 (33.967867) and 36S is about 36 (35.9670807).
|Isotope||Mass number (A)||Atomic number (Z)||Neutron number = A – Z|
How many protons, neutrons and electrons does sulfide ion(S2-) have?
When an atom carries a negative or positive charge by accepting or rejecting electrons, it is called an ion. The ionic properties of the elements depend on the exchange of electrons. In an atomic ion only the number of electrons changes but the number of protons and neutrons does not change.
Sulfur has six electrons in its last orbit. In this case, the sulfur atom can receive electrons in its last shell. During the formation of a bond, the last shell of sulfur receives two electrons and turns into a sulfide ion(S2-). In this case, the sulfur atom carries a negative charge.
S + 2e– → S2-
Here, the electron configuration of sulfide ion(S2-) is 1s2 2s2 2p6 3s2 3p6. This negative sulfide ion(S2-) has sixteen protons, sixteen neutrons, and eighteen electrons.
What are the properties of protons neutrons and electrons?
|Name||Symbol||Relative Mass (amu)||Relative Charge||Actual Mass(kg)||Actual Charge(C)||Location|
|Proton||p||1.00757||+1||1.672×10−27||1.602×10−19||Inside the nucleus|
|Neutron||n||1.0089||0||1.674×10−27||0||Inside the nucleus|
|Electron||e–||5.488×10−4||–1||9.109×10−31||–1.6×10–19||Outside the nucleus|
Why is it important for us to know the number of electrons and protons?
An atomic number is a number that carries the properties of an element. The number of electrons and protons in an element is determined by the atomic number. Also, the exact position of an element is determined in the periodic table. The properties of an element can be determined by electron configuration.
Also, the valency, valence electrons, and ionic properties of the elements are determined by the electron configuration. To determine the properties of an element, it is necessary to arrange the electrons of that element. And to arrange the electrons, you must know the number of electrons in that element.
To know the number of electrons, you need to know the atomic number of that element. We know that an equal number of protons of atomic number are located in the nucleus of the element and electrons equal to protons are in orbit outside the nucleus.
Atomic number (Z) = Number of electrons
We already know that the atomic number of sulfur is 16. That is, there are sixteen electrons in the atom of the sulfur element. So, it is possible to determine the properties of sulfur from the electron configuration. Now, the electron configuration of sulfur shows that the last orbit has six electrons. Therefore, the valence electrons of sulfur are six.
The last shell of sulfur has two unpaired electrons, so the valency of sulfur is 2. The last electron of sulfur enters the p-orbital. Therefore, it’s a p-block element. To know these properties of sulfur one must know the number of electrons and protons of sulfur.