Berkelium(Bk) electron configuration and orbital diagram

Berkelium is the 97th element in the periodic table and its symbol is ‘Bk’. Berkelium is a classified actinide element. The total number of electrons in berkelium is ninety-seven. These electrons are arranged according to specific rules of different orbits. The arrangement of electrons in different orbits and orbitals of an atom in a certain order is called electron configuration. The electron configuration of a berkelium atom can be done in two ways.

Electron configuration through orbit (Bohr principle)
Electron configuration through orbital (Aufbau principle)

Electron configuration through orbitals follows different principles. For example Aufbau principle, Hund’s principle, and Pauli’s exclusion principle. The electron configuration and orbital diagram of berkelium is the main topic in this article. Hopefully, after reading this article you will know in detail about this.

Table of Contents

Berkelium atom electron configuration through orbit

Scientist Niels Bohr was the first to give an idea of the atom’s orbit. He provided a model of the atom in 1913. The complete idea of the orbit is given there. The electrons of the atom revolve around the nucleus in a certain circular path. These circular paths are called orbit(shell). These orbits are expressed by n. [n = 1,2,3,4 . . . The serial number of the orbit]

K is the name of the first orbit, L is the second, M is the third, and N is the name of the fourth orbit. The electron holding capacity of each orbit is 2n².

Shell Number (n)	Shell Name	Electrons Holding Capacity (2n²)
1	K	2
2	L	8
3	M	18
4	N	32

Electron holding capacity of shells

For example,

n = 1 for K orbit.
The maximum electron holding capacity in K orbit is 2n² = 2 × 1² = 2.
For L orbit, n = 2.
The maximum electron holding capacity in L orbit is 2n² = 2 × 2² = 8.
n=3 for M orbit.
The maximum electrons holding capacity in M orbit is 2n² = 2 × 3²= 18.
n=4 for N orbit.
The maximum electrons holding capacity in N orbit is 2n² = 2 × 4² = 32.

Therefore, the maximum electron holding capacity in the first shell is two, the second shell is eight and the 3rd shell can have a maximum of eighteen electrons.

Berkelium atom electron configuration (Bohr model)

The atomic number is the number of electrons in that element. The atomic number of berkelium is 97. That is, the number of electrons in berkelium is ninety-seven. Therefore, a berkelium atom will have two electrons in the first shell, eight in the 2nd orbit, eighteen electrons in the 3rd shell, and thirty-two in the 4th shell.

According to Bohr’s formula, the fifth shell will have thirty-seven electrons but the fifth shell of berkelium will have twenty-seven electrons, eight electrons in the sixth shell and the remaining two electrons will be in the seventh shell. Therefore, the order of the number of electrons in each shell of the berkelium(Bk) atom is 2, 8, 18, 32, 27, 8, 2.

Electrons can be arranged correctly through orbits from elements 1 to 18. The electron configuration of an element with an atomic number greater than 18 cannot be properly determined according to the Bohr atomic model. The electron configuration of all the elements can be done through the orbital diagram.

Electron configuration of berkelium through orbital

Atomic energy shells are subdivided into sub-energy levels. These sub-energy levels are also called orbital. The most probable region of electron rotation around the nucleus is called the orbital. The sub-energy levels depend on the azimuthal quantum number. It is expressed by ‘l’. The value of ‘l’ is from 0 to (n – 1). The sub-energy levels are known as s, p, d, and f.

Orbit Number	Value of ‘l’	Number of subshells	Number of orbital	Subshell name	Electrons holding capacity	Electron configuration
1	0	1	1	1s	2	1s²
2	0 1	2	1 3	2s 2p	2 6	2s² 2p⁶
3	0 1 2	3	1 3 5	3s 3p 3d	2 6 10	3s² 3p⁶ 3d¹⁰
4	0 1 2 3	4	1 3 5 7	4s 4p 4d 4f	2 6 10 14	4s² 4p⁶ 4d¹⁰ 4f¹⁴

Orbital number of the subshell

For example,

If n = 1,
(n – 1) = (1–1) = 0
Therefore, the value of ‘l’ is 0. So, the sub-energy level is 1s.
If n = 2,
(n – 1) = (2–1) = 1.
Therefore, the value of ‘l’ is 0, 1. So, the sub-energy levels are 2s, and 2p.
If n = 3,
(n – 1) = (3–1) = 2.
Therefore, the value of ‘l’ is 0, 1, 2. So, the sub-energy levels are 3s, 3p, and 3d.
If n = 4,
(n – 1) = (4–1) = 3
Therefore, the value of ‘l’ is 0, 1, 2, 3. So, the sub-energy levels are 4s, 4p, 4d, and 4f.
If n = 5,
(n – 1) = (n – 5) = 4.

Therefore, l = 0,1,2,3,4. The number of sub-shells will be 5 but 4s, 4p, 4d, and 4f in these four subshells it is possible to arrange the electrons of all the elements of the periodic table.

Subshell name	Name source	Value of ‘l’	Value of ‘m’ (0 to ± l)	Number of orbital (2l+1)	Electrons holding capacity 2(2l+1)
s	Sharp	0	0	1	2
p	Principal	1	−1, 0, +1	3	6
d	Diffuse	2	−2, −1, 0, +1, +2	5	10
f	Fundamental	3	−3, −2, −1, 0, +1, +2, +3	7	14

Number of electrons in the orbital

The orbital number of the s-subshell is one, three in the p-subshell, five in the d-subshell and seven in the f-subshell. Each orbital can have a maximum of two electrons. The sub-energy level ‘s’ can hold a maximum of two electrons, ‘p’ can hold a maximum of six electrons, ‘d’ can hold a maximum of ten electrons, and ‘f’ can hold a maximum of fourteen electrons.

Electron configuration via Aufbau principal

Aufbau is a German word, which means building up. The main proponents of this principle are scientists Niels Bohr and Pauli. The Aufbau method is to do electron configuration through the sub-energy level. The Aufbau principle is that the electrons present in the atom will first complete the lowest energy orbital and then gradually continue to complete the higher energy orbital.

The energy of an orbital is calculated from the value of the principal quantum number ‘n’ and the azimuthal quantum number ‘l’. The orbital for which the value of (n + l) is lower is the low energy orbital and the electron will enter that orbital first.

Orbital	Orbit (n)	Azimuthal quantum number (l)	Orbital energy (n + l)
3d	3	2	5
4s	4	0	4

Energy of orbital

Here, the energy of 4s orbital is less than that of 3d. So, the electron will enter the 4s orbital first and enter the 3d orbital when the 4s orbital is full. The method of entering electrons into orbitals through the Aufbau principle is 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d.

The first two electrons of berkelium enter the 1s orbital. The s-orbital can have a maximum of two electrons. Therefore, the next two electrons enter the 2s orbital. The p-orbital can have a maximum of six electrons. So, the next six electrons enter the 2p orbital. The second orbit is now full. So, the remaining electrons will enter the third orbit.

Then the two electrons will enter the 3s orbital and the next six electrons will be in the 3p orbital of the third orbit. The 3p orbital is now full. So, the next two electrons will enter the 4s orbital and ten electrons will enter the 3d orbital. The 3d orbital is now full. So, the next six electrons enter the 4p orbital. Then the next ten electrons will enter the 4d orbital.

The 4d orbital is now full. So, the next eight electrons enter the 5p and 6s orbital. Then the next fourteen electrons will enter the 4f orbital. The 4f orbital is now full of electrons. So, the next ten electrons will enter the 5d orbital and the next six electrons will enter the 6p orbital.

The 6p orbital is now full. So, the next two electrons will enter the 7s orbital. Then the remaining nine electrons will enter the 5f orbital. Therefore, the berkelium full electron configuration will be 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 5f⁹ 6s² 6p⁶ 7s².

Note: The abbreviated(short) electron configuration of berkelium is [Rn] 5f⁹ 7s². When writing an electron configuration, you have to write serially.

How to write the orbital diagram for berkelium?

To create an orbital diagram of an atom, you first need to know Hund’s principle and Pauli’s exclusion principle. Hund’s principle is that electrons in different orbitals with the same energy would be positioned in such a way that they could be in the unpaired state of maximum number and the spin of the unpaired electrons will be one-way.

And Pauli’s exclusion principle is that the value of four quantum numbers of two electrons in an atom cannot be the same. To write the orbital diagram of berkelium(Bk), you have to do the electron configuration of berkelium. Which has been discussed in detail above. 1s is the closest and lowest energy orbital to the nucleus. Therefore, the electron will first enter the 1s orbital.

According to Hund’s principle, the first electron will enter in the clockwise direction and the next electron will enter the 1s orbital in the anti-clockwise direction. The 1s orbital is now filled with two electrons. Then the next two electrons will enter the 2s orbital just like the 1s orbital.

The next three electrons will enter the 2p orbital in the clockwise direction and the next three electrons will enter the 2p orbital in the anti-clockwise direction. Then the next two electrons will enter the 3s orbital just like the 1s orbital and the next six electrons will enter the 3p orbital just like the 2p orbital.

The 3p orbital is now full. So, the next two electrons will enter the 4s orbital just like the 1s orbital. Then the next five electrons will enter the 3d orbital in the clockwise direction and the next five electrons will enter the 3d orbital in the anti-clockwise direction.

The 3d orbital is now full. So, the next six electrons will enter the 4p orbital just like the 2p orbital. Then the next two electrons will enter the 5s orbital just like the 1s orbital and the next ten electrons will enter the 4d orbital just like the 3d orbital. The 4d orbital is now full of electrons. Then the next eight electrons will enter the 5p and 6s orbital just like the 2p and 1s orbital.

The 6s orbital is now full of electrons. So, the next seven electrons will enter the 4f orbital in the clockwise direction and the next seven electrons will enter the 4f orbital in the anti-clockwise direction. The 4f orbital is now full. So, the next ten electrons will enter the 5d orbital just like the 3d orbital.

Then the next eight electrons will enter the 6p and 7s orbital just like the 2p and 1s orbital. The 7s orbital is now full of electrons. So the next seven electrons will enter the 5f orbital in the clockwise direction and the remaining two electrons will enter the 5f orbital in the anti-clockwise direction. This is clearly shown in the figure of the orbital diagram of berkelium.